1765 OPA LOCKA BLVD
MIAMI, FL 33054
PHONE 800.228.2580
FAX 305.685.6360
SBC Industries:
“…We hereby extend no less than an excellent recommendation for the way we have seen this company perform, manage and coordinate their product scheduling. We foresee SBC Industries, Inc. as a very positive sheet metal company with continued growth.”
Unlimited Roofing Services, Inc.
Manny Mendez, President
(Miami, FL)
Mike Orth:
“I am in receipt of your brochure on your flashings. I must say that you have attacked a serious problem in commercial roofing and handled it quite well. I have no doubt that these items will eliminate the problems associated with pitch pans and shoddy flashings. I definitely recommend their use to our customers.”
GS Roofing Products Company, Inc.
Pat Neuhaus, Commercial Sales Manager
(Charleston Heights, SC)
SBC Industries:
“Mike Orth of SBC Industries has manufactured roof related sheet metal accessories on behalf of Titan Roofing South, Inc for the last eight years. The components supplied to Titan have always been of the highest quality, exacting tolerances, and provided on schedule. In fact, the more difficult assemblies as provided by Mike are second to none.
Titan has utilized SBC products on institutional, government, and private projects without compromise and the materials have always met or exceeded specifications provided.
Please let this memo serve as the highest recommendation for Mike Orth and SBC Industries. Please don’t hesitate to call for a personal reference.”
Titan Roofing Services, Inc.
Mark A. Sinclair, President TRSI
(Pompano Beach, FL)
Mike Orth:
“I’d like to take this opportunity to commend SBC Industries on your ability to provide the highest quality of commercial stainless steel roof flashings at a very reasonable cost. We have been extremely pleased with your knowledge and ability to fabricate custom flashings for our customers.
Your staff is knowledgeable, flexible, and customer focused. Keep up the Great Job!”
Dewald Roofing Co., Inc.
Charles B. Middleton, Vice President/Owner
(Central Square, NY)
Mike:
“I just wanted to let you know that our last pipe flashing order for Bell South in Mullins, SC worked real well. Thanks for hustling them out for us.
We’re starting a project during the second week of June with quite a few square tubes on a slope that support an equipment screen. I’ll be in touch when we get into it.
Again, thanks for the prompt service.”
Triple M Roofing Corp.
Jon P. Milanese, Vice President
(Fort Lauderdale, FL)
Mr. Orth:
“…We have approved your product to be included in the Dade County Public School Design Criteria Standards. And your product will be incorporated into the next amendment to the Dade County Public School Design Criteria Standards.
Thank you for bringing new ideas into our standards.”
Dade County Public Schools
S.P. “Chany” Almazan
(Miami, FL)
Mr. Orth:
“This is to confirm that SBC Industries’ pipe and angle flashings are acceptable for use in conjunction with Tamko roofing systems.”
Tamko Asphalt Products
Helene Hardy Pierce, Manager
(Joplin, MO)
Mr. Orth:
“I appreciate receiving your literature showing your stainless steel prefabricated flashing details for roof penetrations. The design of your details echoes those details shown in the National Roofing Contractor’s BUR manuals, but which are seldom used by roofers because of the precision sheet metal work required for their successful installation. The average roofer and sheet metal shop just seems to avoid the more difficult metal forming operations and relies instead on the time honored (or dishonored) pitch pans for protecting roof penetrations.
I think the readily available precision shapes you offer will encourage roofers to upgrade their details and the roof performance itself by fully utilizing your S.B.C. products. An entire roof, utilizing your flashings at all penetrations, would be a thing of beauty to behold.
We, at Celotex, would welcome the appearance of the S.B.C. Industries’ Products on any of our warranted roofs. These details, obviously, are an improvement over conventional methods of dealing with roof penetrations. Keep up the good work!”
Celotex
Smith A. Funk, AIA, PE, CRC
(Tampa, FL)
SBC Industries:
“This is to acknowledge that I have been specifying prefabricated stainless round flashings by S.B.C., North Miami, Florida for the past year and that S.B.C. is listed in our Sheet Metal Flashing Master Section as one of the accepted manufacturers for pipe and conduit roof protrusions through roof.”
Spillis Candella & Partners
Alicia Garcia, CCS
(Coral Gables, FL)
CC: SBC Industries
“SBC is the leading flashing manufacturer in Florida and probably in the entire US. They have a great metal fabrication facility, very friendly and open, and they have a great production capacity. They also manufacture all sorts of other metals for the roofing related industry, such as gutters and accessories, roof vents, cupolas, etc. and they can bend almost any metal for any architectural need.”
Weather Guard Industries
Carlos Collazo, President
(Miami, FL)
Re: S.B.C. Industries – Stainless Steel Flashings S-
“The above company’s flashings are approved for Garland Systems...”
The Garland Company Inc.
Richard Corso, Garland Technical Advisor
(Cleveland, OH)
Mike Orth:
“Please accept this letter as approval for the metal flashing S.B.C. Industries produces to be used in conjunction with Amerival roof installations.
We think these are quality flashings which should perform well.”
Amerival
Greg Halliday, Technical Services
(Houston, TX)
Mike:
“Thank you for sending us your brochure on your company’s unique flashing. I was very impressed with their unique designs and quality.
Therefore, please use this letter as written verification that S.B.C. Industries
metal flashings are acceptable to Tri-
Tri-
Robert White, Technical Services Manager
(Port Arthur, TX)
Mike:
“This is to confirm that your stainless steel flashing components are acceptable for use with our membrane systems…”
Siplast
Kenneth Wolford, Manager Technical Support
(Irving, TX)
Mr. Orth:
“This letter is long overdue but better late than never. Thank you for sending me your brochure on your complete line of prefabricated stainless steel roof penetration flashings. Having had some experience with your products in the past, I am aware of the quality that is designed into them. When installed properly, they’re almost foolproof.
Malarkey Roofing Company would welcome the use of SBC Industries products on any of our warranted roofs.”
Malarkey Roofing Company
John F. DeChandt, Assistant to the President
(Portland, OR)
Mr. Orth
“We have had our Technical Committee review your stainless steel prefabricated flashing details for roof penetrations and I am happy to report that we endorse their recommended and proper use on Barrett warranted projects.
The expression of “ban the pan” has been widely accepted by our firm and your details provide an economical basis for accomplishing that goal.”
Barrett Company
Tomothy M. Barrett, Vice President, RCI, CRC
(Millington, NJ)
TESTIMONIALS
